● During the day, the solar charge panel converts sunlight into electricity recharging the batter. Using this stored energy, the LED lights turn on automatically at night when motion is detected
● This light will on for 4 seconds - 3 minutes ( adjustable ) at a time once the motion is detected
● The lamp can be installed within 16 feet cable length of your chosen solar panel location
● You can adjust the angle of the solar panel by moving the adjustment on the solar panel to a different locking position
● “Auto”: When the switch is in the “Auto” position, the 60 LED light will turn on automatically at night once motion is detected
● “ON”: When the switch is in the “On” position, the light will remain on and can be used as a regular light
● “Off”: When the switch is in the “Off” position, the light will remain off and will not detect any movement
● Detection Distance: 2m - 12m ( adjustable )
● Detection Range: 180 degrees
● "SENS": Controls the sensitivity of motion sensor
● "TIME": Controls the duration of each light cycle
● "LUX" : Determines how dark to turn on light
● Cable length: 4.5 - 5M
● Lumen: 615LM
● It can be bright for 1.5h after fully charged

Tips:
● Ideally, for maximum detection range, the light should be mounted 6.5 to 9.8 feet above the area to be scanned
● To avoid unexpected triggering, the sensor should stay away from heat sources such as barbecues, air-conditioners